SHURE MX150B/O-XLR ไมค์หนีบ Subminiature Lavalier Microphone

Shure MX150 Subminiature Lavalier Microphone is a subminiature, multi-positioned clip-on microphone well suited for broadcast operation, sermons, presentations, public address and much more.

This version includes the RK100PK XLR in-line preamplifier for use with standard XLR connections in mixers, recorders, mic-pres, etc. Shure’s CommShield technology makes the MX150 impervious to noise caused by cell phones, PDAs, WiFi and other RFI.

The microphone ships with a snap-fit foam windscreen and multi-position tie clip with an integrated cable management system that minimizes noise without increasing cable strain and tension.

Features

• Omnidirectional polar pattern and wired XLR connection
• CommShield Technology guards against interference from cellular RF devices and digital bodypack transmitters
• Matte black, sleek design for inconspicuous placement
• Multi-position tie clip allows for a variety of placement options and features an integrated cable management system for convenient cable dress with minimal handling noise
• Kevlar-reinforced soft-flex cable design further reduces handling noise while providing superior flexibility for routing and placement
• User-changeable equalization caps for response shaping (omnidirectional only)
• Snap-fit, concise windscreen provides protection from plosives and wind noise with minimal visibility
• Legendary Shure quality, ruggedness, and reliability

 Specifications

• Transducer  Electret condenser 
• Polar Pattern  Omnidirectional 
• Frequency Response  20 to 20,000Hz 
• Output Impedance  165.0 Ω 
• Sensitivity  -34.5 dBV/Pa (19.0 mV) 
• Max Input Sound Level (SPL)  1000 Ω load: 125.0 dB SPL; 2500 Ω load: 130.0 dB SPL 
• Signal-to-Noise Ratio  59.5 dB 
• Dynamic Range  @1kHz
• 1000 Ω: 90.5 dB SPL; 2500 Ω load: 95.5 dB SPL 
• Self Noise  34.5 dB
• (equivalent SPL, A-weighted, typical) 
• Clipping Level  1000 Ω load: 1.0 dBv; 2500 Ω load: -4.5 dBv 
• Operating Temperature  Operating: 0 to 135°F (-18 to 57°C)
• Storage: -20 to 165°F (-29 to 74°C) 
• Polarity  XLR: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 
• Power Requirements  11-52VDC phantom power (IEC-61938), < 2.2mA 
• Dimensions (LxDiameter)  Length: 5’ (1.52m)
• Diameter: 0.23" (5.8mm) 
• Weight  4.3 oz (121 g) 
•