SHURE SLX14-R13 MX150B/C ชุดไมค์ลอยแบบหนีบปกเสื้อ Lavalier Wireless System

SLX1 Bodypack Transmitter

The reliable SLX1 wireless bodypack transmitter is designed to hold up to the most adverse conditions. SLX1 can be used in a variety of SLX Wireless systems, including Lavalier, Headworn, Guitar/Bass, Instrument, and Combo.

• Automatic Transmitter Setup
• Backlit LCD with timeout feature
• Frequency and power lockout
• 3-segment battery fuel gauge
• 2 AA batteries (included) provide 8 hours continuous use
• 470 - 782 MHz operating range
• Dimensions: 108 mm H x 64 mm W x 19 mm D (4.25" x 2.5" x 0.75")

SLX Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.

SPECIFICATIONS

• Audio Input Level 
  -10 dBV maximum at mic gain position 
  +10 dBV maximum at 0 dB gain position 
  +20 dBV maximum at -10 dB gain position
• Gain Adjustment Range 
  30dB
• Input Impedance 
  1 megohm
• RF Transmitter Output 
  30 mW maximum (dependent on applicable country regulations) Dimensions 
  108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
• Weight 
  81 grams (3 oz.) without batteries
• Housing 
  Molded ABS case
• Power Requirements 
  2 AA size alkaline or rechargeable batteries
• Battery Life 
  >8 hours (alkaline)

SLX4 Diversity Receiver

Available Options
SLX4 Diversity Receiver 
SLX4L Diversity Receiver w/ Logic Output

The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. For use with SLX Wireless.

With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.

Model SLX4L is available with logic output for use with software echo cancellation and remote battery life monitoring. Logic-enabled transmitters include MX690 and MX890. 

FEATURES

SLX Wireless Systems feature the patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.

• Automatic Frequency Selection
• Automatic Transmitter Setup
• 960 Selectable frequencies across 24 MHz bandwidth
• Detachable 1/4 wave antennas
• Microprocessor-controlled diversity
• RF presence LED
• 5-segment audio meter
• Multi-function, backlit LCD
• Low battery indicator
• Frequency and power lockout
• Rugged metal chassis
• Volume control on rear of unit
• 1/2 rack design
• Furnished rack hardware
• Non-slip bumpers for use out of rack
• XLR and 1/4" outputs
• Optional logic functionality for software echo cancellation and remote battery life monitoring (SLX4L only)

SPECIFICATIONS

• Audio Output Level (ref. +/– 38 kHz deviation with 1 kHz tone)
  XLR connector (into 600 Ohm load): –13 dBV 
  1/4 inch connector (into 3000 Ohm load): –2 dBV
• Output Impedance 
  XLR connector: 200 Ohms 
  1/4 inch connector: 1 kilohm
• XLR output 
  Impedance balanced 
  Pin 1: Ground (cable shield) 
  Pin 2: Audio 
  Pin 3: No Audio
• Sensitivity 
  -105 dBm for 12 dB SINAD, typical
• Image Rejection 
  >70 dB, typical
• Power Requirements 
  12 to 18 Vdc at 150 mA, supplied by external power supply
• Dimensions 
  42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
• Weight 
  816 g (1 lb. 13 oz.)
• Housing 
  Galvanized steel

 MX150B/C-TQG

• Transducer Type : Condenser
• Polar Pattern: Omnidirectional, Cardioid
• Frequency Response: 20 Hz - 20000 kHz
• Sound Pressure: