EON 15 P-1

High performance powered 15" speaker (original model) with integrated amplifier, suitable for clubs, bands, DJs, schools, etc.

System Application:

Live sound reinforcement, speech, vocals, and music playback in entertainment, A/V, and institutional venues – especially when ease of use, audio quality and portability are important factors. Amplification and monitoring for electronic musical instruments.

Key Features:

• 15" Differential Drive® low-frequency driver with neodymium magnet for light weight and reduced distortion.

• 1" (throat diameter) JBL compression driver with 1.75" titanium diaphragm and ferrofluid cooling.

• Internally Bi-amplified – 130 watts low frequency and 50 watts hi-frequency (bi-amplified) – actual power delivered to the drivers.

• Balanced, Mic/Line switchable, XLR input.

• Loop-through XLR output. “Daisy-chain�? additional EON speakers.

• 90° x 60° (nominal) constant directivity horn.

• Thermomaster® Total Thermal Management System®. A single piece, cast-aluminum baffle integrates the woofer frame, horn, and amplifier heat sink. Air movement in the finned ports dissipates heat – no internal or external cooling fans are required.

• Rugged, lightweight (47 lbs.), co-polymer enclosure.

• Integral 35 mm pole mount receptacle with securing thumbscrew.

• Multi-angle enclosure for front of house or stage monitor application.

• Integral attachment points for optional JBL and third-party mounting brackets.

Specifications

Freq. Range (-10 dB): 47 Hz - 18 kHz
Freq. Response (±3 dB): 65 Hz - 16 kHz
Horz. Coverage (-6 dB): 90° Nominal
Vert. Coverage (-6 dB): 60° Nominal
Rated Maximum SPL: 127 dB, @ 1 m (3.3 ft)
Dimensions (H x W x D): 686 mm x 430 mm x 444 mm (27 in x 17 in x 17.5 in)
Net Weight: 21 kg (47 lbs)
LF Driver: Integral frame with 15" (380 mm) driver, neodymium magnet, 2" Differential Drive voice coil.
HF Driver: JBL 2418H-1 1" (throat diameter) compression driver with 1.75" diameter titanium diaphragm. Ferro-fluid cooled.
Amplifier Power LF: 130 watts @ low-frequency driver impedance, <.1% THD.
Amplifier Power HF: 50 watts @ high-frequency driver impedance, <.1% THD.
Input Sensitivity: -55 dBu to -2 dBu for rated output (Mic/Line switch in MIC position) +9 dBu to +26 dBu for rated output (Mic/Line switch in LINE position)
Enclosure Material: Aluminum baffle, gray co-polymer enclosure and protective bezel
Audio Connectors: Input XLR/F, balanced LoopOut XLR/M, balanced
Crossover Freq.: 1.5 kHz.
AC Input: Switchable 115 - 230 VAC (±10%), 50 - 60 Hz.,
175 watts rating per UL, detachable IEC (male) power connector.