YAMAHA XH200 เครื่องขยายเสียง  200 W x 2 RL= 24 ohms (70 V) RL= 48 ohms (100 V)

 

The XM/XH Series combines light weight (10kg) and compact design, with a powerful, premium quality performance. The XM4180 and XM4080 power amplifiers are designed for the most demanding live performance uses and offer 4-channels with 4x180W/8Ohm and 4x80W/8Ohm. The 2 channel XH200 comes with 2x 200W/24 Ohm (70V) and 2x200W/ 48 Ohm (100V) and matches various installation sound systems.

• 2 channel 100V amplifier with 200W
• Euroblock Inputs
• built-in subwoofer high pass filter
• monitor/remote connector

 

100V models		XH200
Output power; 20Hz-20kHz	70V line	200W x 2, RL=50ohms
	100V line	200W x 2, RL=25ohms
120V models		XH200
Output power; 20Hz-20kHz	70V line	200W x 2, RL=50ohms
	100V line	200W x 2, RL=25ohms
230V models		XH200
Output power; 20Hz-20kHz	70V line	200W x 2, RL=50ohms
	100V line	200W x 2, RL=25ohms
240V models		XH200
Output power; 20Hz-20kHz	70V line	200W x 2, RL=50ohms
	100V line	200W x 2, RL=25ohms
General specifications		XH200
Total harmonic distortion		Less than 0.1% (40Hz-20kHz; Halfpower), RL=4ohms
Intermodulation distortion		Less than 0.1% (60Hz:7kHz=4:1; Halfpower)
Frequency response		+0dB, -0.5dB (HPF=40Hz, 80Hz~20kHz)
S/N ratio		More than 103dB (DIN AUDIO)
Hum & noise level	Residual output noise	Less than -65dBu
Crosstalk		Less than -60dB
Voltage gain		38dB (100V), 35dB (70V)
Input sensitivity		+4dBu
Maximum input voltage		+22dBu
I/O Connectors	Line input / output ports	2x Euroblock
	Speaker output ports	2x Barrier strip
	Control ports	D-sub 15pin
Processors		HPF (40Hz/ 80Hz, 12dB/oct)
Protection circuit	Load protection	Power switch on/off mute, DC-fault (Output relay off; Restored automatically), Clip limiting (THD ≥ 0.5%)
	Amplifier protection	Thermal (Mute the output; heatsink temp ≥ 90°C; return automatically), VI limiter (Limit the output, RL ≤ 16ohms)
	Power supply protection	Thermal (Amplifier shuts down automatically, Operation not restored automatically; heatsink temp ≥ 90°C)
Amplifier class		EEEngine
Cooling		Variable-speed fan
Power requirements		Depend on area of purchase; 100V, 120V, 230V or 240V; 50/60Hz
Power consumption	Music source equivalent	400W
	Idling	40W
	Stand-by	5W
Dimensions	W	480mm; 18-7/8in
	H	88mm; 3-7/16in (2U)
	D	412mm; 16-1/4in
Net weight		9.8kg; 21.6lbs
Accessories		Owner’s manual, AC power cable, Security cover, 4x 3-pin Euroblock connector