SHURE MX412S/C ไมโครโฟนแบบก้านยาว Microphone, Gooseneck With Preamp

 

 MX412S/C 12" Gooseneck Microphone with switch, cardioid brings a whole new meaning to the word flexible. Beyond their fully adjustable gooseneck lies a new level of flexibility, the new Microflex interchangeable condenser microphone cartridge. Designed for easy replacement and supercardioid polar pattern, the interchangeable cartridge offers wide frequency response and accurate sound reproduction for a broad variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the new Microflex product line for enhanced convenience and consistent sound.

The microphone also features high sensitivity and balanced, transformerless output for maximum immunity to electromagnetic hum and RF interference, even over long cable runs.

Features

 

• Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
• Interchangeable cartridges provide the right polar pattern for every application
• Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
• Shock mount provides over 20 dB isolation from surface vibration noise
• Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
• Snap-fit foam windscreen

Specifications

Frequency Response	50 to 17,000 Hz
Polar Pattern	Cardioid
Output Impedance	180 ohms actual (EIA rated at 150 ohms)
Sensitivity	Cardioid: -35.0 dBV/Pa (17.8 mV) (At 1,000 Hz, open circuit voltage)
Maximum SPL	Cardioid: 124.2 dB (1 kHz at 1% THD, 1 kilohm load)
Equivalent Output Noise (A-weighted)	Cardioid: 28.0 dB SPL
Signal to Noise Ratio	Cardioid: 66.0 dB (referenced at 94 dB SPL)
Dynamic Range at 1 kilohm load	96.2 dB 100 dB at 0 gain
Common Mode Rejection	45.0 dB minimum
Preamplifier Output Clipping Level	-6.0 dBV (0.5 V) -12 dBV at 0 gain
Polarity	Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
Power Requirements	11 to 52 Vdc phantom, 2.0 mA
Operating Temperature Range	-18 to 57 degrees C (0 to 135 degrees F)
Relative Humidity	0 to 95%
Dimensions	Microphone: 16.88 x 0.79" (428.74 x 20.07mm)  Mounting Flange: 2.62" / 66.5mm
Weight	17.8 oz. (504.6 g)